ATV61HD15N4
22d8eb35fa57
Fiche technique · 26 mai 2026
Caractéristiques complémentaires
| [Us] rated supply voltage 380...480 V ( | 15...10 %) |
|---|---|
| Voltage/frequency ratio | Energy Saving, quadratic |
| CC | Link communication card |
| Interbus | S communication card |
| Modbus/Uni | Telway communication card |
| Multi | pump card |
| Supply frequency 50...60 Hz ( | 5...5 %) |
| Speed range 1...100 in open | loop mode, without speed feedback |
| Speed accuracy +/ | 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback |
| Torque accuracy +/ | 15 % in open-loop mode, without speed feedback |
| Transient overtorque 130 % of nominal motor torque, +/ | 10 % for 60 s |
| Type of cable With an IP21 or an IP31 kit | 3-strand IEC cable at 40 °C, copper 70 °C PVC |
| Without mounting kit | 1-strand IEC cable at 45 °C, copper 70 °C PVC |
| Without mounting kit | 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR |
| With UL Type 1 kit | 3-strand UL 508 cable at 40 °C, copper 75 °C PVC |
| Electrical connection AI1 | /AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / |
| L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/ | , PO, PA/+, PA, PB terminal 25 mm² / AWG 3 |
| Tightening torque AI1 | /AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m |
| L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/ | , PO, PA/+, PA, PB 5.4 N.m / 47.7 lb.in |
| Supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/ | 5 %, <= 10 |
| mA for overload and short | circuit protection |
| Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/ | 5 %, <= 10 |
| mA for overload and short | circuit protection |
| Internal supply 24 V DC (21...27 V), <= 200 mA for overload and short | circuit |
| Analogue input type AI1 | /Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 |
| AI2 software | configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits |
| AI2 software | configurable voltage 0...10 V DC, input voltage 24 V max, impedance |
| Sampling duration Analog input AI1 | /Al1+ 2 ms, +/- 0.5 ms |
| Analog input Al2 2 ms, +/ | 0.5 ms |
| Analog output AO1 2 ms, +/ | 0.5 ms |
| Discrete input LI1...LI5 2 ms, +/ | 0.5 ms |
| Discrete input LI6 (if configured as logic input) 2 ms, +/ | 0.5 ms |
| Accuracy AI1 | /Al1+ +/- 0.6 % for a temperature variation 60 °C |
| AI2 +/ | 0.6 % for a temperature variation 60 °C |
| AO1 +/ | 1 % for a temperature variation 60 °C |
| Linearity error AI1 | /Al1+ +/- 0.15 % of maximum value |
| AI2 +/ | 0.15 % of maximum value |
| AO1 +/ | 0.2 % |
| Analogue output type AO1 software | configurable current, analogue output range 0...20 mA, impedance 500 |
| AO1 software | configurable logic output 10 V, <= 20 mA |
| AO1 software | configurable voltage, analogue output range 0...10 V DC, impedance |
| R1A, R1B, R1C <= 7 ms, tolerance +/ | 0.5 ms |
| R2A, R2B <= 7 ms, tolerance +/ | 0.5 ms |
| (LI6) switch | configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, |
| (LI6) switch | configurable PTC probe, 0...6, impedance 1500 Ohm |
| Drive short | circuit between motor phases |
| Male SUB | D 9 on RJ45 for CANopen |
| Physical interface 2 | wire RS 485 for Modbus |
| Operating position Vertical +/ | 10 degree |
| electromagnetic compatibility Conforming to IEC 61000 | 4-2 level 3 |
| Conforming to IEC 61000 | 4-11 |
| Conforming to IEC 61000 | 4-6 level 3 |
| Conforming to IEC 61000 | 4-3 level 3 |
| Conforming to IEC 61000 | 4-4 level 4 |
| EN 61800 | 3 environments 1 category C3 |
| EN 61800 | 3 environments 2 category C3 |
| EN/IEC 61800 | 3 |
| EN/IEC 61800 | 5-1 |
| IEC 60721 | 3-3 class 3C1 |
| IEC 60721 | 3-3 class 3S2 |
| C | Tick |
| pollution degree 2 conforming to EN/IEC 61800 | 5-1 |
| IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800 | 5-1 |
| IP21 conforming to EN/IEC 61800 | 5-1 |
| IP41 on upper part conforming to EN/IEC 61800 | 5-1 |
| IP54 on lower part conforming to EN/IEC 61800 | 5-1 |
| vibration resistance 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068 | 2-6 |
| 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068 | 2-6 |
| shock resistance 15 gn for 11 ms conforming to EN/IEC 60068 | 2-27 |
| relative humidity 5...95 % without condensation conforming to IEC 60068 | 2-3 |
| 5...95 % without dripping water conforming to IEC 60068 | 2-3 |
| ambient air temperature for operation | 10...50 °C without derating |
| ambient air temperature for storage | 25...70 °C |
Description
- Référence : ATV61HD15N4
- Marque : Schneider
- Disponibilité : En Stock
- Fiche Technique
- Télécharger
Clause de non-responsabilité : Cette fiche est fournie à titre informatif. Senia Electrique ne saurait être tenu responsable de l'utilisation de ces informations sans validation technique préalable. Document généré le 26 mai 2026. Source : https://seniadz.net/index.php/produit/atv61hd15n4/