Génération du PDF…

Merci de patienter quelques secondes

Fiche technique — d67615c16e66 — RE8RA41FUTQ

RE8RA41FUTQ

d67615c16e66

Fiche technique · 19 août 2026

RE8RA41FUTQ

RE8RA41FUTQ

d67615c16e66

En stock

relais temporisé repos à contact de commande - 20..1800 s - 240 V CA - 1OF

Catégorie : Schneider

Caractéristiques complémentaires

20..1800 s 240 V CA - 1OF
Domaine de réglage de la 20
Couple de serrage 0.6
Réglage exact du temps de retard +/ 20 % pleine échelle
[Ie] courant assigné d'emploi <= 2 Aà 24 V, DC 13 pour 70 °C conformément à IEC 60947-5-1/1991
<= 2 Aà 24 V, DC 13 pour 70 °C conformément à VDE 0660
<= 3 Aà 24 V, AC 15 pour 70 °C conformément à IEC 60947-5-1/1991
<= 3 Aà 24 V, AC 15 pour 70 °C conformément à VDE 0660
<= 0.1 Aà 250 V, DC 13 pour 70 °C conformément à IEC 60947-5-1/1991
<= 0.1 Aà 250 V, DC 13 pour 70 °C conformément à VDE 0660
<= 0.2 Aà 115 V, DC 13 pour 70 °C conformément à IEC 60947-5-1/1991
<= 0.2 Aà 115 V, DC 13 pour 70 °C conformément à VDE 0660
Compatibilité de l'entrée numérique Détecteurs CC 2 fils avec courant de fuite < 1 mA, longueur de câble <= 50 m (Y1) Marquage CE Catégorie de surtension III conformément à IEC 60664-1 [Ui] tension assignée d'isolement 250 V conformément à IEC 300 V conformément à CSA Valeur de désengagement > 0,1 Uc
Tenue aux ondes de choc 2 kV conformément à IEC61000 4-5 niveau 3
Description des bornes (15 16-18)OC_ON
(A1 A2)CO
immunité aux micro coupures 3 ms
normes EN/IEC 61812 1
température ambiante pour le stockage 40…85 °C
température de fonctionnement 20…60 °C
humidité relative 15
tenue aux vibrations 0,35 mm 10
degré de pollution 3 conformément à IEC 60664 1
onde de choc non dissipative 4.8 kV
tenue aux champs électromagnétiques rayonnés 10 V/m conformément à IEC 61000 4-3 niveau 3
tenue aux transitoires rapides 2 kV conformément à IEC 61000 4-4 niveau 3
perturbation radiée/conduite Groupe 1 CISPR11 Classe A
CISPR22 classe A
The external control contact C may be an electronic control device, for example a true wire sensor. In this case A1-A2= 24 Vdc and the
control device can only control up to a maximum of 4 relays.
Connection of a 2 Wire Sensor
Example An LC1-F185 contactor supplied with 115 V/50 Hz for a consumption of 55 VA or a current consumption equal to 0.1 A and
necessary to apply a reduction coefficient k to this number of cycles as indicated by curve 2. For cos ϕ = 0.3 k = 0.6 The electrical
durability therefore becomes 1.5 10 operating cycles x 0.6 = 900 000 operating cycles.
Function C Off-Delay Relay with Control Signal
After power up and closing of the control contact C, the output R closes. When control contact C re-opens, timing T starts. At the end
Function 1 Output
Function 2 Outputs
Relay de energised
Ta Adjustable On-delay
Tr Adjustable Off-delay

Description

Clause de non-responsabilité : Cette fiche est fournie à titre informatif. Senia Electrique ne saurait être tenu responsable de l'utilisation de ces informations sans validation technique préalable. Document généré le 19 août 2026. Source : https://seniadz.net/index.php/produit/re8ra41futq/