ZB5AFDE04
3b115ef1399e
Fiche technique · 7 juin 2026
Caractéristiques complémentaires
| tête pour bouton | poussoir à serrure - pousser-tourner |
|---|---|
| -Ø 22 | noir |
| Fonction produit Tête de bouton | poussoir non lumineux |
| Profil de l'unité de commande Bouton | tournant à clé |
| Boite associée XALD 1 | |
| XALK 2 | |
| température ambiante pour le stockage | 40…70 °C |
| température de fonctionnement | 25…70 °C |
| tenue au nettoyage haute pression 7000000 Pa à 55 °C,distance | 0,1 m |
| normes EN/IEC 60947 | 1 |
| EN/IEC 60947 | 5-1 |
| EN/IEC 60947 | 5-4 |
| EN/IEC 60947 | 5-5 |
| tenue aux vibrations 5 gn (f = 2 | |
| 60068 | 2-27 |
| 60068 | 2-27 |
| Panel Cut | out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) |
| Connection by Screw Clamp Terminals or Plug | in Connectors or on Printed Circuit Board |
| (2) For selector switches and Emergency stop buttons, use of an anti | rotation plate type ZB5AZ902 is recommended. |
| By screw clamp terminals or plug | in connector 40 1.57 30 1.18 |
| (2) For selector switches and Emergency stop buttons, use of an anti | rotation plate type ZB5AZ902 is recommended. |
| Panel Cut | outs (Viewed from Installer’s Side) |
| A | 30 mm min. / 1.18 in. min. |
| B | 40 mm min. / 1.57 in. min. |
| Printed Circuit Board Cut | outs (Viewed from Electrical Block Side) |
| A | 30 mm min. |
| B | 40 mm min. |
| A | 1.18 in. min. |
| B | 1.57 in. min. |
| The cumulative tolerance must not exceed 0.3 mm / 0.012 in. | T1 + T2 = 0.3 mm max. |
| Minimum thickness of circuit board | 1.6 mm / 0.06 in. |
| Cut | out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004 |
| Orientation of body/fixing collar ZB5AZ009 | ± 2 30’ (excluding cut-outs marked a and b). |
| Tightening torque of screws ZBZ006 | 0.6 N.m (5.3 lbf.in) max. |
| » with each selector switch head (ZB5AD | |
| (1) Head ZB5AD | |
| Mounting of Adapter (Socket) ZBZ01 | |
| 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01 | |
| 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut | out marked a) |
| 5 1 elongated hole for aligning the printed circuit board (with cut | out marked b) |
| 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01 | |
| Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01 |
Description
- Référence : ZB5AFDE04
- Marque : Schneider
- Disponibilité : En Stock
- Fiche Technique
- Télécharger
Clause de non-responsabilité : Cette fiche est fournie à titre informatif. Senia Electrique ne saurait être tenu responsable de l'utilisation de ces informations sans validation technique préalable. Document généré le 7 juin 2026. Source : https://seniadz.net/index.php/produit/zb5afde04/