50437

Référence :

50437 Marque : Schneider Disponibilité : En Stock

• 50437
• Characteristics
• Closed toroid for residual current protection TA - Ø
• 30 mm
• Main
• Range Vigirex
• Device short name TA30
• Product or component type Earth leakage current sensor
• Device application Equipment monitoring and control
• Range compatibility Vigirex RH plug-in relay
• [Ie] rated operational current 65 A
• Complementary
• Current transformer type A type closed toroid
• Network type AC
• DC
• Network frequency 45...440 Hz
• [Ui] rated insulation voltage 1000 V
• Transformer ratio 1/1000
• [Icw] rated short-time withstand current 100 kA / 0.5 s
• Residual short-circuit withstand current 85 kA / 0.5 s conforming to IEC 60947-2
• Overvoltage category IV
• [Uimp] rated impulse withstand voltage 12 kV
• Mounting mode Clip-on Vigirex relay
• Fixed plain backplate
• Fixed profiled sheet metal
• Fixed slotted backplate
• Clip-on DIN rail
• Calorific value 0.98 MJ
• Connections - terminals Tunnel type terminals : >= 0.22 mm²
• Diameter 30 mm (inner)
• Cable outer diameter 15 mm : 25 mm² (maximum)
• Product weight 0.12 kg
• Height 82 mm
• Width 60 mm
• Depth 29 mm
• Environment
• IP degree of protection IP30
• Connectors : IP20
• environmental characteristic Exposure to damp heat not in service conforming to IEC 60068-2-30 : 28 cycles
• 25...55 °C, RH 95 %
• Salt mist conforming to IEC 60068-2-52 : Kb/2
• Exposure to damp heat in service conforming to IEC 60068-2-56 : 48 hours : category
• C2
• pollution degree Level 3 conforming to IEC 60664-1
• ambient air temperature for operation -35...70 °C
• ambient air temperature for storage -55...85 °C
• Contractual warranty
• 1 / 2
• The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
• This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
• It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
• Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
• Warranty period 18 months
• 2 / 2