ABL8MEM24003

Référence :

ABL8MEM24003 Marque : Schneider Disponibilité : En Stock

• ABL8MEM24003
• Characteristics
• regulated SMPS - 1 or 2-phase - 100..240 V AC - 24
• V - 0.3 A
• Main
• Range of product Phaseo
• Product or component type Power supply
• Power supply type Regulated switch mode
• Input voltage 100...240 V AC phase to phase, terminal(s): L1-L2
• 100...240 V AC single phase, terminal(s): N-L1
• 120...250 V DC
• Output voltage 24 V DC
• Rated power in W 7 W
• Input protection type Integrated fuse (not interchangeable)
• Power supply output current 0.3 A
• Output protection type Against short-circuits
• Thermal
• Ambient air temperature for -25...55 °C without
• operation 55...70 °C with
• Complementary
• Input voltage limits 85...264 V
• Network frequency 47...63 Hz
• Inrush current <= 20 A Cos phi > 0.5
• Efficiency > 78 %
• Output voltage limits 22.2...28.8 V adjustable
• Power dissipation in W 2 W
• Current consumption 0.18 A at 240 V
• 0.25 A at 100 V
• Line and load regulation +/- 3 %
• Residual ripple 250 mV
• Holding time >= 10 ms at 100 V
• >= 150 ms at 230 V
• Connections - terminals Screw type terminals for input connection, connection capacity: 2 x 0.14...2 x 2.5 mm²
• AWG 26...AWG 14
• Screw type terminals for output connection, connection capacity: 2 x 0.14...2 x 2.5
• mm² AWG 26...AWG 14
• Marking CE
• Mounting support 35 x 15 mm symmetrical DIN rail
• 35 x 7.5 mm symmetrical DIN rail
• Panel 2 screws, diameter : 4 mm
• Operating position Vertical
• Operating altitude 2000 m
• Output coupling Parallel
• Series
• Name of test Conducted emissions on the power line conforming to EN 55022 Class B
• Electrostatic discharges conforming to EN/IEC 61000-4-2
• Emission conforming to EN 50081-1
• Induced electromagnetic field conforming to EN/IEC 61000-4-6
• Primary outage conforming to IEC 61000-4-11
• Radiated electromagnetic field conforming to EN/IEC 61000-4-3
• Radiated emissions conforming to EN 55022 Class B
• Rapid transient conforming to IEC 61000-4-4
• Surge conforming to EN/IEC 61000-4-5
• Harmonic current emission conforming to EN/IEC 61000-3-2
• Status LED 1 LED green for output voltage
• Depth 59 mm
• 1 / 3
• The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
• This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
• It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
• Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
• Height 100 mm
• Width 36 mm
• Product weight 0.1 kg
• Environment
• product certifications TUV 60950-1
• TUV 60950-1
• RCM
• EAC
• KC
• standards UL 508
• CSA C22.2 No 60950-1
• environmental characteristic EMC conforming to EN 55022 Class B
• EMC conforming to EN 61000-6-3
• EMC conforming to EN/IEC 61000-6-2
• EMC conforming to EN/IEC 61204-3
• Safety conforming to EN/IEC 60950-1
• Safety conforming to SELV
• IP degree of protection IP20 conforming to EN/IEC 60529
• ambient air temperature for storage -40...70 °C
• relative humidity 0...90 % during operation
• 0...95 % in storage
• overvoltage category Class II conforming to VDE 0106-1
• dielectric strength Between input and output
• Contractual warranty
• Warranty period 18 months
• Regulated Switch Mode Power Supplies
• Dimensions
• a in mm a in in. a1 in mm a1 in in.
• ABL8MEM05040 54 2.12 42 1.65
• ABL8MEM12020 54 2.12 42 1.65
• ABL8MEM24003 36 1.41 24 0.94
• ABL8MEM24006 36 1.41 24 0.94
• ABL8MEM24012 54 2.12 42 1.65
• ABL7RM24025 74 2.91 60 2.36
• Regulated Switch Mode Power Supply
• Internal Wiring Diagram
• 2 / 3
• Regulated Switch Mode Power Supplies
• Series or Parallel Connection
• Series Connection
• (1) Two Shottky diodes Imin = power supply In and Vmin = 50 V
• Parallel Connection
• Family Series Parallel
• ABL 7RM/8MEM 2 products max. 2 products max.
• Series or parallel connection is only recommended for products with identical references.
• Regulated Switch Mode Power Supplies
• Derating
• The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the
• temperature around the electronic components is too high, their life will be significantly reduced.
• The nominal ambient temperature for the Modular range of Phaseo power supplies is 55°C. Above this temperature, derating is
• necessary up to a maximum temperature of 70°C (except for the ABL7RM24025 model).
• The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on
• the ambient temperature.
• X Maximum operating temperature (°C)
• (1) With an ABL7RM24025
• (2) With an ABL8MEM•••••
• 3 / 3