ABR1S418B

Référence :

ABR1S418B Marque : Schneider Disponibilité : En Stock

• ABR1S418B
• Characteristics
• output interface module - 17.5 mm -
• electromechanical - 24 V AC/DC - 2 NO
• Main
• Range of product Interface for discrete signals
• Product or component type Electromechanical output interface module
• Contacts type and composition 2 NO
• [Uc] control circuit voltage 24 V
• Control circuit type AC/DC
• Control circuit frequency 50/60 Hz
• Width pitch dimension 17.5 mm
• [In] rated current <= 55 mA AC
• <= 62 mA DC
• Reverse polarity protection With, circuit application: yes
• Short circuit protection 16 A external fuse gF (Ik <= 2.5 kA AC and Ik <= 100 A DC)
• 16 A external fuse gG (Ik <= 2.5 kA AC and Ik <= 100 A DC)
• [Ith] conventional free air thermal 12 A conforming to IEC 60947-1
• current
• Local signalling Green mechanical indicator for position of contacts and 1 green LED control signal state
• Complementary
• Control circuit voltage limits 30 V energization threshold: 16.5 V
• Maximum switching voltage 125 V DC
• Housing colour Grey
• Connections - terminals Screw clamp terminal
• Drop-out voltage <= 3.8 V
• Holding current >= 4.9 mA DC
• >= 5.2 mA AC
• Power dissipation in W <= 1.5 W
• [Ue] rated operational voltage <= 125 V DC conforming to IEC 60947-5-1
• <= 230 V AC conforming to IEC 60947-5-1
• Network frequency 50/60 Hz
• [Ie] rated operational current 1 A AC-13 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• 1 A AC-14 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
• 1 A AC-15 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
• 1 A DC-13 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1
• 4 A AC-12 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
• 5 A DC-12 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1
• Minimum switching current 3 mA
• Minimum switching voltage 17 V
• Electrical reliability <= 0.00000001
• Operating time <= 12 ms between de-energisation of coil and closing of NC contact
• <= 12 ms between de-energisation of coil and closing of NO contact
• <= 12 ms between energisation of coil and closing of NC contact
• <= 12 ms between energisation of coil and closing of NO contact
• Contact bounce time <= 3 ms
• Operating rate in Hz <= 6 Hz at no-load
• <= 0.5 Hz at Ie
• Mechanical durability >= 20000000 cycles
• [Ui] rated insulation voltage 250 V conforming to IEC 60947-1
• 250 V conforming to VDE 0110 group C
• Flame retardance V0 conforming to UL 94
• Cable cross section 0.27...4 mm², 1 wire rigid
• 0.34...2.5 mm², 1 or 2 wires flexible with cable end
• 0.6...2.5 mm², 1 or 2 wires flexible without cable end
• 0.27...2.5 mm², 2 wires rigid
• Operating position Any position
• Installation category II conforming to IEC 60947-1
• Mounting support Asymmetrical DIN rail
• Combination rail
• Symmetrical DIN rail
• Product weight 0.095 kg
• Environment
• Immunity to microbreaks 8 ms
• Dielectric strength 1500 V for 1 minute between independent contacts
• 2500 V for 1 minute between wired interface and earth
• 4000 V for 1 minute between coil circuit and contact circuits
• Standards IEC 60947-5-1
• Product certifications BV
• CSA
• DNV
• LROS (Lloyds register of shipping)
• UL
• IP degree of protection IP20 conforming to IEC 60529
• Protective treatment TC
• Fire resistance 850 °C conforming to IEC 60695-2-1
• Shock resistance 50 gn for 11 ms conforming to IEC 60068-2-27
• Vibration resistance 6 gn (f = 10...55 Hz) conforming to IEC 60068-2-6
• Electromagnetic compatibility 1.2/50 ms shock waves immunity test, 0.25 kV for U > 50 V conforming to IEC 255-4
• 1.2/50 ms shock waves immunity test, 0.5 kV for U < 50 V conforming to IEC 255-4
• Electrostatic discharge immunity test level 3, 8 kV conforming to IEC 61000-4-2
• Rapid transients immunity test, on input/output 1 kV conforming to IEC 61000-4-4
• Rapid transients immunity test, on power supply 2 kV conforming to IEC 61000-4-4
• Ambient air temperature for operation -20...60 °C at Un
• -5...40 °C unrestricted operation
• Ambient air temperature for storage -40...70 °C
• Operating altitude <= 3000 m
• Pollution degree 3 conforming to IEC 60947-5-1
• Contractual warranty
• Warranty period 18 months
• 2
• Product data sheet
• ABR1S418B
• Dimensions Drawings
• Electromechanical Interface Module
• Dimensions
• 3
• Product data sheet
• ABR1S418B
• Connections and Schema
• Electromechanical Interface Module
• Example of Application with PLC
• Interfacing PLC discrete outputs
• (1) Essential on inductive loads (can be replaced with peak limiter)
• (2) PLC positive logic transistor (or relay) outputs
• 4
• Product data sheet
• ABR1S418B
• Connections and Schema
• Interface with Mechanical Indication + LED
• Circuit Diagram
• 2 N/O
• 5
• Product data sheet
• ABR1S418B
• Performance Curves
• Electrical Durability of Contacts
• AC Loads
• Test conditions: in accordance with standard IEC 947-5-1 set up for rated control voltage, operating rate: 1800 cycles/hour. (0.5 Hz).
• AC-12 operating cycles in millions
• AC-12 Control of resistive loads and isolated solid state loads via optocoupler (cos ϕ ≥ 0.9)
• (1) 24 V
• (2) 48 V
• (3) 127 V
• (4) 230 V
• AC-13 operating cycles in millions
• AC-13 Control of isolated solid state loads via transformer (cos ϕ ≥ 0.65)
• (1) 24 V
• (2) 48 V
• (3) 127 V
• (4) 230 V
• 6
• AC-14 and AC-15 operating cycles in millions
• AC-14 Control of weak electromagnetic loads of electromagnets ≤ 72 VA (make: cos ϕ = 0.3, break: cos ϕ = 0.3)
• AC-15 Control of electromagnetic loads of electromagnets > 72 VA (make: cos ϕ = 0.7, break: cos ϕ =0.4)
• (1) 24 V
• (2) 48 V
• (3) 127 V
• (4) 230 V
• DC Loads
• Test conditions: in accordance with standard IEC 947-5-1 set up for rated control voltage, operating rate: 1800 cycles/hour. (0.5 Hz).
• DC-12 operating cycles in millions
• DC-12 Control of resistive loads and isolated solid state loads via optocoupler (L/R ≤ 1 ms)
• (1) 24 V
• (2) 48 V
• (3) 127 V
• DC-13 operating cycles in millions
• DC-13 Control of electromagnets (L/R ≤ 2 x (Ue x Ie) in ms, with Ue: rated operating voltage and Ie: rated operating current)
• (1) 24 V
• (2) 48 V
• (3) 127 V
• 7