ABR2SB312B

Référence :

ABR2SB312B Marque : Schneider Disponibilité : En Stock

• ABR2SB312B
• Characteristics
• output interface module - 9.5 mm -
• electromechanical - 24 V DC - 1 C/O low-level
• Main
• Range of product Interface for discrete signals
• Product or component type Slim electromechanical output interface module
• Product specific application For very low level switching
• Contacts type and composition 1 C/O
• [Uc] control circuit voltage 24 V
• Control circuit type DC
• Width pitch dimension 17.5 mm
• [In] rated current <= 23 mA
• Reverse polarity protection With for yes
• Short circuit protection 0.4 A external fuse fast blow (Ik <= 1 kA AC and Ik <= 100 A DC)
• [Ith] conventional free air thermal 0.05 A conforming to IEC 60947-1
• current
• Local signalling Green mechanical indicator for position of contacts and 1 green LED control signal state
• Complementary
• Control circuit voltage limits 28.8 V energization threshold: 16.9 V
• Connections - terminals Screw clamp terminal
• Drop-out voltage <= 3.8 V
• Holding current 2 mA
• Power dissipation in W 0.55 W
• Maximum switching voltage 60 V AC
• 60 V DC
• [Ue] rated operational voltage <= 48 V AC conforming to IEC 60947-5-1
• <= 48 V DC conforming to IEC 60947-5-1
• Network frequency 50/60 Hz
• Minimum switching current 0.01 mA
• Minimum switching voltage 0.01 V
• Electrical reliability <= 0.00000001
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• Operating time <= 6 ms between de-energisation of coil and closing of NC contact
• <= 6 ms between de-energisation of coil and closing of NO contact DC
• <= 6 ms between energisation of coil and closing of NC contact
• <= 6 ms between energisation of coil and closing of NO contact DC
• Contact bounce time <= 2 ms Operating rate in Hz 10 Hz at no-load Mechanical durability >= 20000000 cycles
• [Ui] rated insulation voltage 250 V conforming to VDE 0110 group C
• 300 V conforming to IEC 60947-1
• Flame retardance V0 conforming to UL 94
• Cable cross section 0.27...4 mm², 1 wire rigid
• 0.34...2.5 mm², 1 or 2 wires flexible with cable end
• 0.6...2.5 mm², 1 or 2 wires flexible without cable end
• Operating position Any position
• Installation category II conforming to IEC 60947-1
• Mounting support Asymmetrical DIN rail
• Combination rail
• Symmetrical DIN rail
• Product weight 0.048 kg
• Environment
• Immunity to microbreaks 1 ms
• Dielectric strength 1000 V for 1 minute between open contacts
• 1500 V between coil circuit and contact circuits
• 2500 V for 1 minute between wired interface and earth
• Standards IEC 60947-5-1
• Product certifications BV
• CSA
• DNV
• LROS (Lloyds register of shipping)
• UL
• IP degree of protection IP20 conforming to IEC 60529
• Protective treatment TC
• Fire resistance 960 °C conforming to IEC 60695-2-1
• Shock resistance 30 gn for 11 ms conforming to IEC 60068-2-27
• Vibration resistance 3 gn (f = 10...150 Hz) conforming to IEC 60068-2-6
• Electromagnetic compatibility 1.2/50 µs shock waves immunity test, 0.5 kV for U < 50 V conforming to IEC 60947-1
• 1.2/50 µs shock waves immunity test, 1.5 kV for U < 150 V conforming to IEC 60947-1
• 1.2/50 µs shock waves immunity test, 2.5 kV for U < 300 V conforming to IEC 60947-1
• Electromagnetic field immunity test level 3, 10 V/m between 27...1000 MHz conforming to IEC
• 61000-4-3
• Electrostatic discharge immunity test level 3, 8 kV conforming to IEC 61000-4-2
• Fast transients immunity test level 3, on input/output 1 kV conforming to IEC 61000-4-4
• Fast transients immunity test level 3, on power supply 2 kV conforming to IEC 61000-4-4
• Ambient air temperature for operation -5...40 °C unrestricted operation
• -5...55 °C from 0.85...1.1 Us
• -25...55 °C at Us
• -25...70 °C at Us with 8 mm space between ABR2S1...
• Ambient air temperature for storage -40...80 °C
• Operating altitude <= 3000 m
• Pollution degree 2 conforming to IEC 60947-1
• Contractual warranty
• Warranty period 18 months
• 2
• Product data sheet
• ABR2SB312B
• Dimensions Drawings
• Slim Electromechanical Interface Module
• Dimensions
• 3
• Product data sheet
• ABR2SB312B
• Connections and Schema
• Slim Electromechanical Interface Module
• Example of Application with PLC
• Interfacing PLC discrete outputs
• (1) Essential on inductive loads (can be replaced with peak limiter)
• (2) PLC positive logic transistor (or relay) outputs
• (3) PLC analog inputs
• (4) Channel X
• (5) Analog sensors
• 4
• Product data sheet
• ABR2SB312B
• Connections and Schema
• Slim Electromechanical Interface Module
• Circuit Diagram
• 1 C/O
• 5