variable speed drive ATV11 - 0.18kW - 230V 1-phase supply - IP20
Caractéristiques principales
Produits associés
Options et accessoires compatibles
Autres produits associés
Voir tous les produits →-
Contacteurs, sectionneurs, relais multifonctions
LAD9V1★★★★½Prix sur demandeEn stock
Voir le produit
Description du produit
Référence :
ATV11HU05M2A
Marque : Schneider
Disponibilité : En Stock
Caractéristiques Techniques du produit
ATV11HU05M2A
Characteristics
variable speed drive ATV11
0.18kW - 230V 1-
phase supply
IP20
Main
Range of product Altivar
Product or component type Variable speed drive
Product specific application Simple machine
Component name ATV11
Application market Asia
Assembly style With heat sink
EMC filter Without EMC filter
Built
in fan Without
Network number of phases Single phase
[Us] rated supply voltage 200...240 V (
15...10 %)
Supply frequency 50...60 Hz (
5...5 %)
Motor power kW 0.18 kW
Line current 3.3 A 200 V 1 kA
Nominal output current 1.4 A 230 V motor 4 kHz
Maximum transient current 2.1 A 60 s
Power dissipation in W 14 W at nominal load
Switching frequency 2...16 kHz adjustable
4...16 kHz with derating factor
Braking torque 150 % of nominal motor torque with braking resistor at high inertia
20 % of nominal motor torque without braking resistor at no load
80 % of nominal motor torque with braking resistor at no load
Asynchronous motor control profile Sensorless flux vector control with PWM type motor control signal
Electrical connection Terminal 1.5 mm² AWG 14 AI1, RA
RC, LI1...LI4, DO
Terminal 1.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PC
Supply Internal supply for logic inputs 15 V +/
15 % <= 100 mA overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm) 5...5.25 V DC <= 10 mA overload and
short
circuit protection
Analogue input type Configurable current AI1 0...20 mA 250 Ohm
Configurable current AI1 4...20 mA 250 Ohm without adding resistor
Configurable voltage AI1 0...10 V 40000 Ohm
Jun 12, 2017
1
Disclaimer
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Configurable voltage AI1 0...5 V 40000 Ohm only with internal supply
Sampling duration 20 ms AI1 analog
20 ms LI1...LI4 discrete
Response time 20 ms DO
Linearity error +/
1 % output DO
+/
5 % input AI
Discrete input type Assignable Ll1 forward 5000 Ohm 15 V 24 V
Assignable Ll2 reverse 5000 Ohm 15 V 24 V
Assignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V
Discrete input logic Positive logic (source) LI1...LI4, < 5 V (state 0), > 11 V (state 1)
Logic input not wired LI1...LI4, < 5 V (state 1) Negative logic (source) LI1...LI4, > 11 V (state 0)
Discrete output type Assignable as external voltage DO 30 V max, 30 mA
Assignable as internal voltage DO
Assignable as open collector logic output DO 100 Ohm, 50 mA max
Factory set as PWM open collector output DO at 2 kHz 10 mA max
Protected relay logic RA
RC 1 NO
Minimum switching current 10 mA 24 V DC RA
RC
Maximum switching current 2 A 250 V AC inductive cos phi = 0.4 7 ms RA
RC
2 A 30 V DC inductive cos phi = 0.4 7 ms RA
RC
5 A 250 V AC resistive cos phi = 1 RA
RC
5 A 30 V DC resistive cos phi = 1 RA
RC
Protection type Line supply overvoltage drive
Line supply undervoltage drive
Overcurrent between output phases and earth drive
Overheating protection drive
Short
circuit between motor phases drive
Thermal protection motor
Frequency resolution 0.1 Hz display unit
Converter A/D, 10 bits analog input
Electromagnetic compatibility 1.2/50 µs
8/20 µs surge immunity test level 3 EN/IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 EN/IEC 61000
4-4
Electrostatic discharge immunity test level 3 EN/IEC 61000
4-2
Radiated radio
frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3
Motor cable length 20 m with additional EMC filter from 2 to 16 kHz EN 55011 class A group 1
5 m with additional EMC filter from 2 to 16 kHz EN 55011 class B
Vibration resistance 1 gn 13...200 Hz EN/IEC 60068
2-6
1.5 mm peak to peak 3...13 Hz EN/IEC 60068
2-6
Shock resistance 15 gn 11 ms EN/IEC 60068
2-27
Relative humidity 5...93 % without condensation IEC 60068
2-3
5...93 % without dripping water IEC 60068
2-3
Ambient air temperature for operation <= 60 °C with current derating of 2.2 % per °C above 50 °C
-10...40 °C without derating
-10...50 °C by removing the protective cover from the top of the drive
Operating altitude <= 1000 m without derating > 1000 m with current derating 1 % per 100 m
Complementary
Product destination Asynchronous motors
Supply voltage limits 170...264 V
Network frequency limits 47.5...63 Hz
Speed drive output frequency 0...200 Hz
Nominal switching frequency 4 kHz
Speed range 1...20
Transient overtorque 150...170 % of nominal motor torque
Regulation loop Adjustable frequency
Factory
set with the speed loop stability and gain
Possible correction for machines with high resistive torque/inertia/fast cycles
Motor slip compensation Adjustable
Preset in factory
Prospective line Isc 1 kA
Output voltage <= 2 x power supply voltage 2 Insulation Electrical between power and control Analogue input number 1 Discrete input number 4 Discrete output number 2 Acceleration and deceleration ramps Linear from 0 to 99.9 s Braking to standstill By DC injection Insulation resistance > 500 MOhm
Marking CE
Operating position Vertical +/
10 degree
CAD overall width 72 mm
CAD overall height 142 mm
CAD overall depth 108 mm
Product weight 0.9 kg
Environment
Standards EN 50178
Product certifications CSA
C
Tick
N998
UL
IP degree of protection IP20
Ambient air temperature for storage
25...65 °C
Contractual warranty
Warranty period 18 months
Product Life Status END
OF-SALE NOTICE
3
Produits Similaires
Produits récemment consultés
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}