Coupleur station RIO E/IP X80 STD
Caractéristiques principales
Produits associés
Quick ViewAutomate programmableUNYXCAUSB033
- Quick ViewAutomate programmable
UNYSPUSFUV1X
- Quick ViewAutomate programmable
UNYSPUEFUV1X
Options et accessoires compatibles
Autres produits associés
Voir tous les produits →
Description du produit
Référence :
BMXCRA31200
Marque : Schneider
Disponibilité : En Stock
Caractéristiques Techniques du produit
BMXCRA31200
Characteristics
Modicon X80 RIO Drop E/IP STD
Main
Range of product Modicon X80
Product or component type Ethernet RIO drop adaptor
Complementary
Bus type Bus X across the remote backplane
Number of port 2
Integrated connection type Ethernet/IP (device network)
Communication port protocol Ethernet/IP
Communication service RSTP support
Configure IP parameters
Diagnostics for remote I/O devices
The input data are collected and published to the remote I/O head adaptor
Output modules are updated with the data received from remote I/O head adaptor
Function available CCOTF (configuration change on the fly)
Topology Daisy chain loop
Local signalling 1 LED
green for module active (RUN)
1 LED
red for module error (ERR)
1 LED
green/red for module status (Mod Status)
1 LED
green/red for network communication status (Net Status)
1 LED
green for Ethernet link diagnostics (STS)
Product compatibility 0...128 discrete I/O module
0...16 analog I/O module
Marking CE
Module format Standard
Environment
Environmental characteristic Standard environment
Product certifications C
Tick
GOST
Merchant Navy
Standards CSA C22.2 No 142
EN 61131
2
Jun 12, 2017
1
Disclaimer
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
UL 1604
UL 508
CSA C22.2 No 213
IP degree of protection IP20
Ambient air temperature for operation
25...70 °C
Ambient air temperature for storage
40...85 °C
Operating altitude
Produits Similaires
Produits récemment consultés
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}