GC10020M5

Référence :

GC10020M5 Marque : Schneider Disponibilité : En Stock

• GC10020M5
• Characteristics
• TeSys GC - modular contactor - 100 A - 2 NO -
• coil 220...240 V AC
• Main
• Range TeSys
• Product name TeSys GC
• Product or component type Modular contactor
• Device short name GC100
• Contactor application Heating
• Motor control
• Lighting
• Complementary
• Utilisation category AC-7A
• Poles description 2P
• Pole contact composition 2 NO
• [Ue] rated operational voltage <= 250 V AC
• [Ie] rated operational current 100 A AC-7A
• Operating position 30°/Vertical
• Control circuit type AC 50 Hz
• Control circuit voltage 220...240 V AC 50 Hz
• [Uimp] rated impulse withstand voltage 4 kV
• [Ith] conventional free air thermal 100 A at <= 50 °C for power circuit
• current
• [Icw] rated short-time withstand current 250 A <= 40 °C 30 s power circuit
• 800 A <= 40 °C 10 s power circuit
• Associated fuse rating 100 A gL at <= 440 V for power circuit
• Average impedance 1 mOhm at 50 Hz - Ith 100 A for power circuit
• [Ui] rated insulation voltage 500 V conforming to IEC 61095
• 500 V conforming to VDE 0110
• Electrical durability AC-7A : 30000 cycles
• AC-7B : 30000 cycles
• Control type Remote control
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• Mounting mode Clip-on
• Mounting support DIN rail
• Standards IEC 60947-5
• IEC 61095
• Connections - terminals Power circuit : screw clamp terminals 1 cable(s) 35 mm² - cable stiffness: flexible - without cable end
• Power circuit : screw clamp terminals 1 cable(s) 35 mm² - cable stiffness: flexible - with cable end
• Power circuit : screw clamp terminals 1 cable(s) 35 mm² - cable stiffness: solid - without cable end
• Power circuit : screw clamp terminals 2 cable(s) 10 mm² - cable stiffness: solid - without cable end
• Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
• end
• Control circuit : screw clamp terminals 2 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
• end
• Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - with cable end
• Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
• Control circuit : screw clamp terminals 1 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
• Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
• Tightening torque Control circuit : 0.8 N.m - on screw clamp terminals
• Power circuit : 3.5 N.m - on screw clamp terminals
• Operating time 10...25 ms opening
• 10...30 ms closing
• Mechanical durability 1000000 cycles
• Operating rate 300 cyc/h at <= 50 °C
• Control circuit voltage limits 0.2...0.75 Uc at <= 50 °C drop-out 50 Hz
• 0.85...1.1 Uc at <= 50 °C operational 50 Hz
• Hold-in power consumption in VA 6.5 VA at 20 °C 50 Hz
• Heat dissipation 2.1 W at 50/60 Hz
• Environment
• IP degree of protection IP20 conforming to VDE 0106
• IP40 in enclosure conforming to VDE 0106
• Protective treatment TC
• Ambient air temperature for operation -5...50 °C
• Ambient air temperature for storage -40...70 °C
• Operating altitude <= 3000 m
• Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
• Shocks contactor open 10 Gn for 11 ms
• Shocks contactor closed 15 Gn for 11 ms
• Vibrations contactor closed 3 Gn, 5...300 Hz
• Total number of 18 mm modules 3
• Height 85 mm
• Width 54 mm
• Depth 62.5 mm
• Product weight 0.68 kg
• Quantity per set Set of 4
• Colour White
• Contractual warranty
• Warranty period 18 months
• 2