[Ith] conventional free air thermal 16 A at <= 50 °C for power circuit
current
Irms rated making capacity 40 A at 400 V AC for power circuit conforming to IEC 61095
Rated breaking capacity 40 A at 400 V for power circuit conforming to IEC 61095
[Icw] rated short-time withstand current 128 A <= 40 °C 10 s power circuit
40 A <= 40 °C 30 s power circuit
Associated fuse rating 16 A gL at <= 440 V for power circuit
Average impedance 2.5 mOhm at 50 Hz - Ith 16 A for power circuit
[Ui] rated insulation voltage 500 V conforming to IEC 61095
Jun 12, 2017
1
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
500 V conforming to VDE 0110
Electrical durability AC-7A : 100000 cycles
AC-7B : 100000 cycles
Control type Remote control
Mounting mode Clip-on
Mounting support DIN rail
Standards IEC 60947-5
IEC 61095
Connections - terminals Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
end
Control circuit : screw clamp terminals 2 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
end
Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
Control circuit : screw clamp terminals 1 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - without cable end
Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: flexible - without cable end
Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: solid - without cable end
Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: solid - without cable end
Tightening torque Control circuit : 0.8 N.m - on screw clamp terminals
Power circuit : 0.8 N.m - on screw clamp terminals
Operating time 10...25 ms opening
10...30 ms closing
Mechanical durability 1000000 cycles
Operating rate 300 cyc/h at <= 50 °C
Control circuit voltage limits 0.2...0.75 Uc at <= 50 °C drop-out 50 Hz
0.85...1.1 Uc at <= 50 °C operational 50 Hz
Hold-in power consumption in VA 4.6 VA at 20 °C 50 Hz
Heat dissipation 1.6 W at 50/60 Hz
Environment
IP degree of protection IP20 conforming to VDE 0106
IP40 in enclosure conforming to VDE 0106
Protective treatment TC
Ambient air temperature for operation -5...50 °C
Ambient air temperature for storage -40...70 °C
Operating altitude <= 3000 m
Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz