LC1DT32T7

Référence :

LC1DT32T7 Marque : Schneider Disponibilité : En Stock

• LC1DT32T7
• Characteristics
• TeSys D contactor - 4P(4 NO) - AC-1 - <= 440 V
• 32 A - 480 V AC 50/60 Hz coil
• Main
• Range of product TeSys D
• Range TeSys
• Product name TeSys D
• Product or component type Contactor
• Device short name LC1D
• Contactor application Resistive load
• Utilisation category AC-1
• Poles description 4P
• Pole contact composition 4 NO
• [Ue] rated operational voltage <= 300 V DC for power circuit
• <= 690 V AC 25...400 Hz for power circuit
• [Ie] rated operational current 32 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
• Control circuit type AC 50/60 Hz
• Control circuit voltage 480 V AC 50/60 Hz
• Auxiliary contact composition 1 NO + 1 NC
• [Uimp] rated impulse withstand voltage Conforming to IEC 60947
• Overvoltage category III
• [Ith] conventional free air thermal 32 A at <= 60 °C for power circuit
• current 10 A at <= 60 °C for signalling circuit
• Irms rated making capacity 300 A at 440 V for power circuit conforming to IEC 60947
• 140 A AC for signalling circuit conforming to IEC 60947-5-1
• 250 A DC for signalling circuit conforming to IEC 60947-5-1
• Rated breaking capacity 300 A at 440 V for power circuit conforming to IEC 60947
• [Icw] rated short-time withstand current 145 A <= 40 °C 10 s power circuit
• 240 A <= 40 °C 1 s power circuit
• 40 A <= 40 °C 10 min power circuit
• 84 A <= 40 °C 1 min power circuit
• 100 A 1 s signalling circuit
• 120 A 500 ms signalling circuit
• 140 A 100 ms signalling circuit
• Associated fuse rating 35 A gG at <= 690 V coordination type 2 for power circuit
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• 50 A gG at <= 690 V coordination type 1 for power circuit
• 10 A gG for signalling circuit conforming to IEC 60947-5-1
• Average impedance 2.5 mOhm at 50 Hz - Ith 32 A for power circuit
• [Ui] rated insulation voltage 600 V for power circuit certifications CSA
• 600 V for power circuit certifications UL
• 690 V for power circuit conforming to IEC 60947-4-1
• 690 V for signalling circuit conforming to IEC 60947-1
• 600 V for signalling circuit certifications CSA
• 600 V for signalling circuit certifications UL
• Electrical durability 1 Mcycles 32 A AC-1 at Ue <= 440 V
• Power dissipation per pole 2.5 W AC-1
• Protective cover With
• Mounting support Plate
• Rail
• Standards CSA C22.2 No 14
• EN 60947-4-1
• EN 60947-5-1
• IEC 60947-4-1
• IEC 60947-5-1
• UL 508
• Product certifications BV
• GOST
• RINA
• UL
• CCC
• LROS
• GL
• DNV
• CSA
• Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable
• end
• Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
• end
• Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
• end
• Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end
• Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
• Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
• Power circuit : connector 1 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end
• Power circuit : connector 2 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end
• Power circuit : connector 1 cable(s) 2.5...10 mm² - cable stiffness: flexible - with cable end
• Power circuit : connector 2 cable(s) 2.5...10 mm² - cable stiffness: flexible - with cable end
• Power circuit : connector 1 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end
• Power circuit : connector 2 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end
• Tightening torque Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
• Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
• Power circuit : 1.7 N.m - on connector - with screwdriver flat Ø 6 mm
• Power circuit : 1.7 N.m - on connector - with screwdriver Philips No 2
• Operating time 4...19 ms opening
• 12...22 ms closing
• Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
• B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
• Mechanical durability 15 Mcycles
• Operating rate 3600 cyc/h at <= 60 °C
• Complementary
• Coil technology Without built-in suppressor module
• Control circuit voltage limits 0.3...0.6 Uc drop-out at 60 °C, AC 50/60 Hz
• 0.8...1.1 Uc operational at 60 °C, AC 50 Hz
• 0.85...1.1 Uc operational at 60 °C, AC 60 Hz
• Inrush power in VA 70 VA at 20 °C (cos ϕ 0.75) 60 Hz
• 70 VA at 20 °C (cos ϕ 0.75) 50 Hz
• Hold-in power consumption in VA 7.5 VA at 20 °C (cos ϕ 0.3) 60 Hz
• 7 VA at 20 °C (cos ϕ 0.3) 50 Hz
• Heat dissipation 2...3 W at 50/60 Hz
• Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
• 2
• Type mirror contact (1 NC) conforming to IEC 60947-4-1
• Signalling circuit frequency 25...400 Hz
• Minimum switching current 5 mA for signalling circuit
• Minimum switching voltage 17 V for signalling circuit
• Non-overlap time 1.5 ms on de-energisation (between NC and NO contact)
• 1.5 ms on energisation (between NC and NO contact)
• Insulation resistance > 10 MOhm for signalling circuit
• Environment
• IP degree of protection IP2x front face conforming to IEC 60529
• Protective treatment TH conforming to IEC 60068-2-30
• Pollution degree 3
• Ambient air temperature for operation -5...60 °C
• Ambient air temperature for storage -60...80 °C
• Permissible ambient air temperature -40...70 °C at Uc
• around the device
• Operating altitude 3000 m without derating in temperature
• Fire resistance 850 °C conforming to IEC 60695-2-1
• Flame retardance V1 conforming to UL 94
• Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
• Vibrations contactor closed 4 Gn, 5...300 Hz
• Shocks contactor closed 15 Gn for 11 ms
• Shocks contactor open 8 Gn for 11 ms
• Height 91 mm
• Width 45 mm
• Depth 99 mm
• Product weight 0.425 kg
• Offer Sustainability
• Sustainable offer status Not Green Premium product
• RoHS (date code: YYWW) Compliant  - since  0709  -  Schneider Electric declaration of conformity
• Schneider Electric declaration of conformity
• Product end of life instructions Need no specific recycling operations
• Contractual warranty
• Warranty period 18 months
• 3