LC1DT32T7
Documentation technique PDF
Spécificités essentielles
Produits associés
-
Quick ViewAjouter au panier -
Quick ViewAjouter au panier -
Quick ViewAjouter au panier
Options et accessoires compatibles
Référence : LC1DT32T7
Marque : Schneider
Disponibilité : En Stock
- LC1DT32T7
- Characteristics
- TeSys D contactor - 4P(4 NO) - AC-1 - <= 440 V
- 32 A - 480 V AC 50/60 Hz coil
- Main
- Range of product TeSys D
- Range TeSys
- Product name TeSys D
- Product or component type Contactor
- Device short name LC1D
- Contactor application Resistive load
- Utilisation category AC-1
- Poles description 4P
- Pole contact composition 4 NO
- [Ue] rated operational voltage <= 300 V DC for power circuit
- <= 690 V AC 25...400 Hz for power circuit
- [Ie] rated operational current 32 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
- Control circuit type AC 50/60 Hz
- Control circuit voltage 480 V AC 50/60 Hz
- Auxiliary contact composition 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage Conforming to IEC 60947
- Overvoltage category III
- [Ith] conventional free air thermal 32 A at <= 60 °C for power circuit
- current 10 A at <= 60 °C for signalling circuit
- Irms rated making capacity 300 A at 440 V for power circuit conforming to IEC 60947
- 140 A AC for signalling circuit conforming to IEC 60947-5-1
- 250 A DC for signalling circuit conforming to IEC 60947-5-1
- Rated breaking capacity 300 A at 440 V for power circuit conforming to IEC 60947
- [Icw] rated short-time withstand current 145 A <= 40 °C 10 s power circuit
- 240 A <= 40 °C 1 s power circuit
- 40 A <= 40 °C 10 min power circuit
- 84 A <= 40 °C 1 min power circuit
- 100 A 1 s signalling circuit
- 120 A 500 ms signalling circuit
- 140 A 100 ms signalling circuit
- Associated fuse rating 35 A gG at <= 690 V coordination type 2 for power circuit
- Jun 12, 2017
- 1
- Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
- 50 A gG at <= 690 V coordination type 1 for power circuit
- 10 A gG for signalling circuit conforming to IEC 60947-5-1
- Average impedance 2.5 mOhm at 50 Hz - Ith 32 A for power circuit
- [Ui] rated insulation voltage 600 V for power circuit certifications CSA
- 600 V for power circuit certifications UL
- 690 V for power circuit conforming to IEC 60947-4-1
- 690 V for signalling circuit conforming to IEC 60947-1
- 600 V for signalling circuit certifications CSA
- 600 V for signalling circuit certifications UL
- Electrical durability 1 Mcycles 32 A AC-1 at Ue <= 440 V
- Power dissipation per pole 2.5 W AC-1
- Protective cover With
- Mounting support Plate
- Rail
- Standards CSA C22.2 No 14
- EN 60947-4-1
- EN 60947-5-1
- IEC 60947-4-1
- IEC 60947-5-1
- UL 508
- Product certifications BV
- GOST
- RINA
- UL
- CCC
- LROS
- GL
- DNV
- CSA
- Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable
- end
- Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
- end
- Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable
- end
- Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end
- Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
- Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end
- Power circuit : connector 1 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end
- Power circuit : connector 2 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end
- Power circuit : connector 1 cable(s) 2.5...10 mm² - cable stiffness: flexible - with cable end
- Power circuit : connector 2 cable(s) 2.5...10 mm² - cable stiffness: flexible - with cable end
- Power circuit : connector 1 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end
- Power circuit : connector 2 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end
- Tightening torque Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
- Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
- Power circuit : 1.7 N.m - on connector - with screwdriver flat Ø 6 mm
- Power circuit : 1.7 N.m - on connector - with screwdriver Philips No 2
- Operating time 4...19 ms opening
- 12...22 ms closing
- Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
- B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
- Mechanical durability 15 Mcycles
- Operating rate 3600 cyc/h at <= 60 °C
- Complementary
- Coil technology Without built-in suppressor module
- Control circuit voltage limits 0.3...0.6 Uc drop-out at 60 °C, AC 50/60 Hz
- 0.8...1.1 Uc operational at 60 °C, AC 50 Hz
- 0.85...1.1 Uc operational at 60 °C, AC 60 Hz
- Inrush power in VA 70 VA at 20 °C (cos ϕ 0.75) 60 Hz
- 70 VA at 20 °C (cos ϕ 0.75) 50 Hz
- Hold-in power consumption in VA 7.5 VA at 20 °C (cos ϕ 0.3) 60 Hz
- 7 VA at 20 °C (cos ϕ 0.3) 50 Hz
- Heat dissipation 2...3 W at 50/60 Hz
- Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
- 2
- Type mirror contact (1 NC) conforming to IEC 60947-4-1
- Signalling circuit frequency 25...400 Hz
- Minimum switching current 5 mA for signalling circuit
- Minimum switching voltage 17 V for signalling circuit
- Non-overlap time 1.5 ms on de-energisation (between NC and NO contact)
- 1.5 ms on energisation (between NC and NO contact)
- Insulation resistance > 10 MOhm for signalling circuit
- Environment
- IP degree of protection IP2x front face conforming to IEC 60529
- Protective treatment TH conforming to IEC 60068-2-30
- Pollution degree 3
- Ambient air temperature for operation -5...60 °C
- Ambient air temperature for storage -60...80 °C
- Permissible ambient air temperature -40...70 °C at Uc
- around the device
- Operating altitude 3000 m without derating in temperature
- Fire resistance 850 °C conforming to IEC 60695-2-1
- Flame retardance V1 conforming to UL 94
- Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
- Vibrations contactor closed 4 Gn, 5...300 Hz
- Shocks contactor closed 15 Gn for 11 ms
- Shocks contactor open 8 Gn for 11 ms
- Height 91 mm
- Width 45 mm
- Depth 99 mm
- Product weight 0.425 kg
- Offer Sustainability
- Sustainable offer status Not Green Premium product
- RoHS (date code: YYWW) Compliant - since 0709 - Schneider Electric declaration of conformity
- Schneider Electric declaration of conformity
- Product end of life instructions Need no specific recycling operations
- Contractual warranty
- Warranty period 18 months
- 3
Produits Similaires
Produits récemment consultés
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}
