LD4LD030MC

Référence :

LD4LD030MC Marque : Schneider Disponibilité : En Stock

• LD4LD030MC
• Characteristics
• TeSys Integral - contactor breaker - 63 A A AC-43
• - 230...240 V AC coil
• Main
• Range TeSys
• Product name TeSys Integral 63
• Product or component type Contactor breaker
• Device short name LD4LD
• Complementary
• Utilisation category AC-1
• AC-43
• Poles description 3P
• [Ue] rated operational voltage 690 V AC 50/60 Hz
• [Ie] rated operational current 63 A AC AC-1
• 63 A AC AC-43
• [Ith] conventional free air thermal 63 A at <= 40 °C
• current
• Motor power kW 30 kW at 400 V AC 50/60 Hz
• 33 kW at 415 V AC 50/60 Hz
• 55 kW at 660 V AC 50/60 Hz
• 15 kW at 220...240 V AC 50/60 Hz
• 33 kW at 440 V AC 50/60 Hz
• 37 kW at 500 V AC 50/60 Hz
• Control circuit voltage 230...240 V AC 60 Hz
• Test function Self test
• Control type Knob emergency stop red front conforming to CNOMO
• Irms rated making capacity 756...946 A conforming to IEC 60947-4
• [Ipk] rated peak withstand current 105 kA conforming to IEC 60947-2
• Breaking capacity Icu 10 kA at 600...690 V (cos f 0.5) conforming to IEC 60947-2
• Icu 30 kA at 480...525 V (cos f 0.25) conforming to IEC 60947-6-2
• Icu 50 kA at <= 440 V (cos f 0.25) conforming to IEC 60947-2
• [Ics] rated service breaking capacity 10 kA at 600...690 V conforming to IEC 60947-2
• 35 kA at 480...525 V conforming to IEC 60947-2
• 50 kA at <= 440 V conforming to IEC 60947-2
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• Maximum breaking time 4 ms
• Thermal stress limit 300000 A².s
• [Uimp] rated impulse withstand voltage 8 kV conforming to IEC 60947-4
• Control circuit voltage limits 0.25...0.7 Uc drop-out at <= 55 °C
• 0.85...1.1 Uc operation at <= 55 °C
• [Ui] rated insulation voltage 690 V conforming to IEC 60947-1
• Inrush power in VA 450 VA at 20 °C 60 Hz
• Hold-in power consumption in VA 25 VA at 20 °C
• Heat dissipation 11 W at 60 Hz for control circuit
• 5 W at 32 A per pole, hot state for power circuit
• 7 W at 50 A per pole, hot state for power circuit
• 9 W at 63 A per pole, hot state for power circuit
• 4.4 W at 25 A per pole, hot state for power circuit
• 5.8 W at 40 A per pole, hot state for power circuit
• Operating time 12...35 ms AC network closing at 20 °C for control circuit
• 7...20 ms AC network opening at 20 °C for control circuit
• Electrical durability 1 Mcycles on AC-3 - Icu 3 kA - at 415 V - after 1 cycle O-CO-r-CO at Isc
• 0.9 Mcycles on AC-3 - Icu 10 kA - at 415 V - after 1 cycle O-CO-r-CO at Isc
• 0.6 Mcycles on AC-3 - Icu 25 kA - at 415 V - after 1 cycle O-CO-r-CO at Isc
• 0.5 Mcycles on AC-3 - Icu 35 kA - at 415 V - after 1 cycle O-CO-r-CO at Isc
• 0.2 Mcycles on AC-3 - Icu 50 kA - at 415 V - after 1 cycle O-CO-r-CO at Isc
• Mechanical durability 1.2 Mcycles
• Connections - terminals Power circuit : screw clamp terminals 1 cable 6...50 mm² - cable stiffness: flexible - without cable end
• Power circuit : screw clamp terminals 2 cable 6...25 mm² - cable stiffness: flexible - without cable end
• Power circuit : screw clamp terminals 1 cable 6...25 mm² - cable stiffness: flexible - with cable end
• Power circuit : screw clamp terminals 2 cable 6...25 mm² - cable stiffness: flexible - with cable end
• Power circuit : screw clamp terminals 1 cable 6...50 mm² - cable stiffness: solid
• Tightening torque Power circuit : 6 N.m - on screw clamp terminals
• Width 90 mm
• Height 243 mm
• Depth 192 mm
• Product weight 3.8 kg
• Environment
• Standards BS 4752
• BS 4941
• BS 5424
• IEC 60158-1
• IEC 60204-1
• IEC 60204-2
• IEC 60364
• IEC 60947-1
• IEC 60947-2
• IEC 60947-4
• NBN
• NEN
• NF C 20-040
• NF C 63-110
• NF C 63-120
• NF C 63-130
• NF C 63-650
• NF C 79-100
• VDE 0100
• VDE 0110
• VDE 0113
• VDE 0170
• VDE 0171
• VDE 0660
• VDE 471
• Product certifications ASE
• ASEFA
• ASTA
• BV
• CSA
• DEMKO
• DNV
• GL
• 2
• LROS (Lloyds register of shipping)
• NEMKO
• NKK
• OVE
• RINA
• SCC
• SETI
• UL
• USSR
• Protective treatment TH
• Ambient air temperature for operation -20...60 °C
• Ambient air temperature for storage -40...80 °C
• Mechanical robustness Vibrations de-energised state 3 Gn, 1...300 Hz
• Vibrations energised state 3 Gn, 1...300 Hz
• Shocks de-energised state 8 Gn for 11 ms
• Shocks energised state 8 Gn for 11 ms
• IP degree of protection IP20 B conforming to IEC 60144
• IP20 B conforming to IEC 60529
• Operating altitude 3000 m without derating
• Contractual warranty
• Warranty period 18 months
• 3