LXM23DU15M3X

Référence :

LXM23DU15M3X Marque : Schneider Disponibilité : En Stock

• LXM23DU15M3X
• Characteristics
• motion servo drive - Lexium 23 - single phase
• 200...255 V - 1.5 kW - I/O
• Main
• Range of product Lexium 23 Plus
• Product or component type Motion servo drive
• Device short name LXM23
• Complementary
• Format of the drive Book
• Network number of phases 3 phases
• Single phase
• [Us] rated supply voltage 220 V (- 10...15 %) single phase
• 220 V (- 20...15 %) 3 phases
• Supply voltage limits 200...255 V single phase
• 170...255 V 3 phases
• Supply frequency 50/60 Hz (- 5...5 %)
• Network frequency limits 47.5...63 Hz
• Continuous output current 8.3 A
• Continuous power 1500 W at 220 V
• Nominal power 1.5 kW at 220 V
• Leakage current > 3.5 mA
• Output voltage <= power supply voltage
• Electrical isolation Between power and control
• Type of cable Twisted shielded pairs cable (single or double) at 0...55 °C
• Electrical connection Terminal 1.3 mm² / AWG 16 (L1-L2)
• Terminal 2.1 mm² / AWG 14 (R, S, T)
• Terminal 2.1 mm² / AWG 14 (PA/+, PBe)
• Terminal 0.82 mm² / AWG 16 (U, V, W)
• Tightening torque 1.4 N.m (PE (ground))
• Discrete input number 8 programmable
• Discrete input type Programmable (CN1)
• Discrete input voltage 12...24 V DC logic
• Jun 12, 2017
• 1
• Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
• Discrete input logic Positive or negative logic (CN1)
• Discrete output number 5
• Discrete output type (CN1) logic output 12...24 V DC
• Discrete output voltage 12...24 V DC
• Discrete output logic Positive or negative logic (CN1)
• Analogue input number 2
• Absolute accuracy error 0.01 %
• Analogue input type Voltage analog input (T_REF) - 10...10 V input impedance: 10 kOhm
• Voltage analog input (V_REF) - 10...10 V input impedance: 10 kOhm
• Control signal type Servo motor encoder feedback
• Protection type Overcurrent for motor
• Overvoltage for motor
• Undervoltage for motor
• Overheating for motor
• Overload for motor
• Overspeed for motor
• Abnormal pulse control command for drive
• Against reverse polarity for inputs signal
• Against short-circuits for outputs signal
• Communication interface Integrated Modbus
• Type of connector RJ45 (CN3) for Modbus
• Method of access Slave
• Physical interface 2-wire RS485 multidrop for Modbus
• Transmission rate Configurable
• Status LED 1 LED function: charge LED
• Signalling function Servo status and fault codes for five 7-segment display units
• Marking CE
• Type of cooling Integrated fan
• Operating position Vertical
• Width 85 mm
• Height 162 mm
• Depth 180 mm
• Product weight 2.2 kg
• Environment
• EMC filter Without EMC filter
• Electromagnetic compatibility EMC immunity with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2
• EMC immunity (level 3) conforming to EN/IEC 61000-4-2
• EMC immunity (level 3) conforming to EN/IEC 61000-4-3
• EMC immunity (level 3) conforming to EN/IEC 61000-4-5
• EMC immunity (level 4) conforming to EN/IEC 61000-4-4
• Conducted and radiated emissions with additional EMC filter conforming to EN/IEC 61800-3
• environments 1 and 2 category C2, C3
• Standards EN/IEC 61800-5-1
• Product certifications C-Tick
• CULus 508
• IP degree of protection IP20 for on upper part without protective cover
• IP41 for on upper part with protective cover
• Vibration resistance 0.075 mm peak to peak (f = 10...57 Hz) conforming to IEC 60068-2-6
• 1 gn (f = 57...150 Hz) conforming to IEC 60068-2-6
• Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
• Relative humidity Class 3K3 (5 to 85 %) without condensation or dripping water conforming to IEC 60721-3-3
• Ambient air temperature for operation 0...55 °C conforming to UL
• Ambient air temperature for storage -20...65 °C
• Operating altitude > 1000...2000 m with continuous power derating of 1 % per 100 m
• <= 1000 m without derating
• 2
• Offer Sustainability
• Sustainable offer status Green Premium product
• RoHS (date code: YYWW) Compliant  - since  0943  -  Schneider Electric declaration of conformity
• Schneider Electric declaration of conformity
• REACh Reference not containing SVHC above the threshold
• Reference not containing SVHC above the threshold
• Product end of life instructions Available
• Contractual warranty
• Warranty period 18 months
• 3
• Product data sheet
• LXM23DU15M3X
• Dimensions Drawings
• Dimensions
• 4
• Product data sheet
• LXM23DU15M3X
• Mounting and Clearance
• Mounting Recommendations
• Mount the device in a vertical position (±10°). This is required for cooling the device.
• Clearance
• Many Devices in a cabinet
• A ≥ 100 mm (≥ 4 in.) Free space above/below devices
• B ≥ 80 mm (≥ 3.2 in.) Free space between devices
• C ≥ 40 mm (≥ 1.6 in.) Free space between devices and cabinet
• D ≥ 10 mm (≥ 0.4 in.) Free space between devices
• 5
• One Device in a cabinet
• E ≥ 50 mm (≥ 2 in.) Free space above/below the device
• F ≥ 20 mm (≥ 0.8 in.) Free space between device and cabinet
• 6
• Product data sheet
• LXM23DU15M3X
• Connections and Schema
• Position Control Mode Wiring Diagram (Pulse Control)
• KM1 Line Contactor
• Q1 Circuit breaker
• (1) AC 220 / 230 V Single Phase or Three Phase 50 / 60 Hz
• (2) Pulse Input (Line Driver)
• (3) High-Speed Pulse Input (Line Receiver)
• (4) External Braking Resistor
• (5) Power Supply
• (6) Holding Brake
• (7) Encoder
• (8) Encoder Pulse Output
• (9) Only LXM23A models
• (10) Digital inputs
• (11) Digital outputs
• 7
• Product data sheet
• LXM23DU15M3X
• Connections and Schema
• Position Control Mode Wiring Diagram (Build-In Motion Sequence)
• KM1 Line Contactor
• Q1 Circuit breaker
• (1) AC 220 / 230 V Single Phase or Three Phase 50 / 60 Hz
• (2) External Braking Resistor
• (3) Power Supply
• (4) Holding Brake
• (5) Encoder
• (6) Encoder Pulse Output
• (7) Only LXM23A models
• (8) Digital inputs
• (9) Digital outputs
• 8
• Product data sheet
• LXM23DU15M3X
• Connections and Schema
• Speed Control Mode Wiring Diagram
• KM1 Line Contactor
• Q1 Circuit breaker
• (1) AC 220 / 230 V Single Phase or Three Phase 50 / 60 Hz
• (2) External Braking Resistor
• (3) Power Supply
• (4) Holding Brake
• (5) Encoder
• (6) Encoder Pulse Output
• (7) Only LXM23A models
• (8) Digital inputs
• (9) Digital outputs
• 9
• Product data sheet
• LXM23DU15M3X
• Connections and Schema
• Torque Control Mode Wiring Diagram
• KM1 Line Contactor
• Q1 Circuit breaker
• (1) AC 220 / 230 V Single Phase or Three Phase 50 / 60 Hz
• (2) External Braking Resistor
• (3) Power Supply
• (4) Holding Brake
• (5) Encoder
• (6) Encoder Pulse Output
• (7) Only LXM23A models
• (8) Digital inputs
• (9) Digital outputs
• 10