ZA2EE101

Référence :

ZA2EE101 Marque : Schneider Disponibilité : En Stock

• ZA2EE101
• Characteristics
• single contact block for head Ø22 - 1 NO
• Main
• Range of product Harmony Easy XA2
• Product or component type Contact block
• Device short name ZA2E
• Complementary
• Contacts type and composition 1 NO
• Contacts operation Slow-break
• Contact block type Single
• Contacts usage Standard contacts
• Positive opening Without
• Connections - terminals Screw-clamp terminal, clamping capacity: <= 2 x 1.5 mm² conforming to EN 60947-1
• Screw-clamp terminal, clamping capacity: <= 1 x 2.5 mm² conforming to EN 60947-1 Screw-clamp terminal, clamping capacity: >= 1 x 0.5 mm² conforming to EN 60947-1
• Faston terminals, connection size: 6.3 mm conforming to EN 60947-1
• Tightening torque 0.8 N.m
• Contacts material Silver alloy (Ag/Ni)
• Short circuit protection 10 A (fuse) gL conforming to IEC 60269-1
• [Ith] conventional free air thermal current 10 A conforming to EN/IEC 60947-5-1
• [Ui] rated insulation voltage 600 V 3 conforming to EN 60947-1
• [Uimp] rated impulse withstand voltage 6 kV conforming to EN 60947-1
• [Ie] rated operational current 2 A at 230 V AC-15 A600 conforming to IEC 60947-5-1
• 0.2 A at 110 V DC-13 Q600 conforming to IEC 60947-5-1
• Electrical durability 500000 cycles - utilisation category: AC-15 2 A at 230 V, operating rate: 60 cyc/mn,
• load factor: 0.5 conforming to IEC 60947-5-1
• 500000 cycles - utilisation category: DC-13 0.2 A at 110 V, operating rate: 60 cyc/mn,
• load factor: 0.5 conforming to IEC 60947-5-1
• Environment
• protective treatment TC
• ambient air temperature for storage -40...70 °C
• ambient air temperature for operation -25...55 °C
• IP degree of protection IP20 conforming to IEC 60529
• standards EN/IEC 60947-1
• EN/IEC 60947-5-1
• EN/IEC 60947-5-4
• product certifications CCC
• CE
• CSA
• UL listed
• 1 / 1
• The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
• This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
• It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
• Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.