ZB5AA14
Documentation technique PDF
TETE BOUTON POUSSOIR
Spécificités essentielles
Produits associés
-
Quick ViewAjouter au panier -
Quick ViewAjouter au panier -
Quick ViewAjouter au panier
Options et accessoires compatibles
Référence : ZB5AA14
Marque : Schneider
Disponibilité : En Stock
- ZB5AA14
- Characteristics
- white flush pushbutton head Ø22 spring return
- unmarked
- Main
- Range of product Harmony XB5
- Product or component type Head for non-illuminated push-button
- Device short name ZB5
- Bezel material Plastic
- Mounting diameter 22 mm
- Sale per indivisible quantity 1
- Shape of signaling unit head Round
- Type of operator Spring return
- Operator profile White flush unmarked
- Operator additional information High guard
- Complementary
- CAD overall width 29 mm
- CAD overall height 29 mm
- CAD overall depth 31 mm
- Product weight 0.02 kg
- Mechanical durability 10000000 cycles
- Station name XALD 1...5 cut-outs
- XALK 2...5 cut-outs
- Electrical composition code C1 for <= 9 contacts using single blocks in front mounting
- C2 for <= 9 contacts using single and double blocks in front mounting
- C11 for <= 3 contacts using single blocks in front mounting
- C15 for 1 contacts using single blocks in front mounting
- SF1 for <= 3 contacts using single blocks in front mounting
- SR1 for <= 3 contacts using single blocks in rear mounting
- Environment
- protective treatment TH
- ambient air temperature for storage -40...70 °C
- ambient air temperature for operation -40...70 °C
- overvoltage category Class II conforming to IEC 60536
- IP degree of protection IP67
- IP66 conforming to IEC 60529
- IP69K
- IP69
- NEMA degree of protection NEMA 13
- NEMA 4X
- resistance to high pressure washer 7000000 Pa at 55 °C,distance: 0.1 m
- IK degree of protection IK03 conforming to IEC 50102
- standards EN/IEC 60947-1
- EN/IEC 60947-5-1
- EN/IEC 60947-5-4
- JIS C 4520
- UL 508
- CSA C22.2 No 14
- product certifications BV
- CSA
- DNV
- GL
- LROS (Lloyds register of shipping)
- RINA
- UL listed
- shock resistance 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-
- 1 / 6
- The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
- This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
- It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
- Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
- 27
- 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-
- 27
- vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6
- Dimensions
- Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
- Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
- (1) Diameter on finished panel or support
- (2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
- +0.4 +0.016
- (3) Ø22.5 mm recommended (Ø22.3 ) / Ø0.89 in. recommended (Ø0.88 in. )
- 0 0
- Connections a in mm a in in. b in mm b in in.
- By screw clamp terminals or plug-in connector 40 1.57 30 1.18
- By Faston connectors 45 1.77 32 1.26
- On printed circuit board 30 1.18 30 1.18
- Detail of Lug Recess
- (1) Diameter on finished panel or support
- (2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
- +0.4 +0.016
- (3) Ø22.5 mm recommended (Ø22.3 ) / Ø0.89 in. recommended (Ø0.88 in. )
- 0 0
- Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
- Panel Cut-outs (Viewed from Installer’s Side)
- 2 / 6
- A: 30 mm min. / 1.18 in. min.
- B: 40 mm min. / 1.57 in. min.
- Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
- Dimensions in mm
- A: 30 mm min.
- B: 40 mm min.
- Dimensions in in.
- 3 / 6
- A: 1.18 in. min.
- B: 1.57 in. min.
- General Tolerances of the Panel and Printed Circuit Board
- The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.
- Installation Precautions
- Minimum thickness of circuit board: 1.6 mm / 0.06 in.
- Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
- °
- Orientation of body/fixing collar ZB5AZ009: ± 2 30’ (excluding cut-outs marked a and b).
-
- Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.
- Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
- » every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
- » with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
- The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
- (1) Head ZB5AD•
- (2) Panel
- (2) Nut
- (4) Printed circuit board
- Mounting of Adapter (Socket) ZBZ01•
- 1 2 elongated holes for ZBZ006 screw access
- 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•
- 3 8 × Ø 1.2 mm / 0.05 in. holes
- 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
- 4 / 6
- 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
- 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•
- Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.
- Electrical Composition Corresponding to Code C1
- Electrical Composition Corresponding to Code C2
- Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
- Electrical Composition Corresponding to Code C15
- 1 N/O
- 1 N/C
- 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
- Legend
- Single contact
- Double contact
- 5 / 6
- Light block
- Possible location
- 6 / 6
Produits Similaires
Produits récemment consultés
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}
