ABR2S112B
Characteristics
output interface module
9.5 mm -
electromechanical
24 V DC - 1 NC
Main
Range of product Interface for discrete signals
Product or component type Slim electromechanical output interface module
Contacts type and composition 1 NO
[Uc] control circuit voltage 24 V
Control circuit type DC
Width pitch dimension 12 mm
[In] rated current <= 28 mA
Reverse polarity protection With for yes
Short circuit protection 6.3 A external fuse fast blow (Ik <= 1 kA AC and Ik <= 100 A DC)
[Ith] conventional free air thermal 5 A conforming to IEC 60947
1
current
Local signalling Green mechanical indicator for position of contacts and 1 green LED control signal state
Sale per indivisible quantity 5
Complementary
Control circuit voltage limits 28.8 V energization threshold
16.9 V
Connections
terminals Screw clamp terminal
Holding current 2 mA
Power dissipation in W 0.64 W
Maximum switching voltage 150 V DC
250 V AC
[Ue] rated operational voltage <= 120 V DC conforming to IEC 60947
5-1
<= 230 V AC conforming to IEC 60947
5-1
Network frequency 50/60 Hz
[Ie] rated operational current 1 A AC
14 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
1 A AC
15 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
3 A AC
12 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1
1.5 A DC
13 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1
Jun 12, 2017
1
Disclaimer
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
1.7 A DC
12 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1
Minimum switching current 5 mA
Minimum switching voltage 5 V
Electrical reliability <= 0.00000001
Operating time <= 10 ms between energisation of coil and closing of NO contact DC
<= 12 ms between de
energisation of coil and closing of NO contact DC
Contact bounce time <= 5 ms Operating rate in Hz 10 Hz at no
load 0.5 Hz at Ie Mechanical durability >= 10000000 cycles
[Ui] rated insulation voltage 250 V conforming to VDE 0110 group C
300 V conforming to IEC 60947
1
Flame retardance V0 conforming to UL 94
Cable cross section 0.27...4 mm², 1 wire rigid
0.34...2.5 mm², 1 or 2 wires flexible with cable end
0.6...2.5 mm², 1 or 2 wires flexible without cable end
Operating position Any position
Installation category II conforming to IEC 60947
1
Mounting support Asymmetrical DIN rail
Combination rail
Symmetrical DIN rail
Product weight 0.041 kg
Environment
Immunity to microbreaks 1 ms
Dielectric strength 1000 V for 1 minute between open contacts
2500 V for 1 minute between wired interface and earth
4000 V for 1 minute between coil circuit and contact circuits
Product certifications BV
CSA
DNV
LROS (Lloyds register of shipping)
UL
IP degree of protection IP20 conforming to IEC 60529
Protective treatment TC
Fire resistance 960 °C conforming to IEC 60695
2-1
Shock resistance 30 gn for 11 ms conforming to IEC 60068
2-27
Vibration resistance 3 gn (f = 10...150 Hz) conforming to IEC 60068
2-6
Electromagnetic compatibility 1.2/50 µs shock waves immunity test, 0.5 kV for U < 50 V conforming to IEC 60947
1
1.2/50 µs shock waves immunity test, 1.5 kV for U < 150 V conforming to IEC 60947
1
1.2/50 µs shock waves immunity test, 2.5 kV for U < 300 V conforming to IEC 60947
1
Electromagnetic field immunity test level 3, 10 V/m between 27...1000 MHz conforming to IEC
Electrostatic discharge immunity test level 3, 8 kV conforming to IEC 61000
4-2
Fast transients immunity test level 3, on input/output 1 kV conforming to IEC 61000
4-4
Fast transients immunity test level 3, on power supply 2 kV conforming to IEC 61000
4-4
Ambient air temperature for operation
5...40 °C unrestricted operation
-5...55 °C from 0.85...1.1 Us
-25...55 °C at Us
-25...70 °C at Us with 8 mm space between ABR2S1...
Ambient air temperature for storage
40...80 °C
Operating altitude <= 3000 m Pollution degree 2 conforming to IEC 60947
1 Contractual warranty Warranty period 18 months 2 Product data sheet ABR2S112B Dimensions Drawings Slim Electromechanical Interface Module Dimensions 3 Product data sheet ABR2S112B Connections and Schema Slim Electromechanical Interface Module Example of Application with PLC Interfacing PLC discrete outputs (1) Essential on inductive loads (can be replaced with peak limiter) (2) PLC positive logic transistor (or relay) outputs (3) PLC analog inputs (4) Channel X (5) Analog sensors 4 Product data sheet ABR2S112B Connections and Schema Slim Electromechanical Interface Module Circuit Diagram 1 N/O 5 Product data sheet ABR2S112B Performance Curves Electrical Durability of Contacts AC Loads Test conditions: in accordance with standard IEC 947-5-1 set up for rated control voltage. AC-12 operating cycles in millions AC-12 Control of resistive loads and isolated solid state loads via optocoupler (cos ϕ ≥ 0.9) (1) 24 V (2) 48 V (3) 115 V (4) 230 V AC-14 and AC-15 operating cycles in millions AC-14 Control of weak electro-magnetic loads of electro-magnets ≤ 72 VA (make: cos ϕ= 0.3, break: cos ϕ =0.3) AC-15 Control of electro-magnetic loads of electro-magnets > 72 VA (make: cos ϕ= 0.7, break: cos ϕ= 0.4)
(1) 24 V
(2) 48 V
(3) 115 V
(4) 230 V
DC Loads
Test conditions
in accordance with standard IEC 947-5-1 set up for rated control voltage.
6
DC
12 operating cycles in millions
DC
12 Control of resistive loads and isolated solid state loads via optocoupler (L/R ≤ 1 ms)
(1) 24 V
(2) 48 V
(3) 115 V
DC
13 operating cycles in millions
DC
13 Control of electro-magnets (L/R ≤ 2 x (Ue x Ie) in ms, with Ue: rated operating voltage and Ie: rated operating current, with a load protection diode
(1) 24 V
(2) 48 V
(3) 115 V
7
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}