Fiche technique du produit PDF : 

UGS : 54d62eb78a0b Catégorie :
INTERF R EM S175 BN 24VDC

15.350,29DZD

UGS : 54d62eb78a0b
Produits associés
Référence :

ABR2SB312B Marque : Schneider Disponibilité : En Stock



  • ABR2SB312B
  • Characteristics
  • output interface module - 9.5 mm -
  • electromechanical - 24 V DC - 1 C/O low-level
  • Main
  • Range of product Interface for discrete signals
  • Product or component type Slim electromechanical output interface module
  • Product specific application For very low level switching
  • Contacts type and composition 1 C/O
  • [Uc] control circuit voltage 24 V
  • Control circuit type DC
  • Width pitch dimension 17.5 mm
  • [In] rated current <= 23 mA
  • Reverse polarity protection With for yes
  • Short circuit protection 0.4 A external fuse fast blow (Ik <= 1 kA AC and Ik <= 100 A DC)
  • [Ith] conventional free air thermal 0.05 A conforming to IEC 60947-1
  • current
  • Local signalling Green mechanical indicator for position of contacts and 1 green LED control signal state
  • Complementary
  • Control circuit voltage limits 28.8 V energization threshold: 16.9 V
  • Connections - terminals Screw clamp terminal
  • Drop-out voltage <= 3.8 V
  • Holding current 2 mA
  • Power dissipation in W 0.55 W
  • Maximum switching voltage 60 V AC
  • 60 V DC
  • [Ue] rated operational voltage <= 48 V AC conforming to IEC 60947-5-1
  • <= 48 V DC conforming to IEC 60947-5-1
  • Network frequency 50/60 Hz
  • Minimum switching current 0.01 mA
  • Minimum switching voltage 0.01 V
  • Electrical reliability <= 0.00000001
  • Jun 12, 2017
  • 1
  • Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
  • Operating time <= 6 ms between de-energisation of coil and closing of NC contact
  • <= 6 ms between de-energisation of coil and closing of NO contact DC
  • <= 6 ms between energisation of coil and closing of NC contact
  • <= 6 ms between energisation of coil and closing of NO contact DC
  • Contact bounce time <= 2 ms Operating rate in Hz 10 Hz at no-load Mechanical durability >= 20000000 cycles
  • [Ui] rated insulation voltage 250 V conforming to VDE 0110 group C
  • 300 V conforming to IEC 60947-1
  • Flame retardance V0 conforming to UL 94
  • Cable cross section 0.27...4 mm², 1 wire rigid
  • 0.34...2.5 mm², 1 or 2 wires flexible with cable end
  • 0.6...2.5 mm², 1 or 2 wires flexible without cable end
  • Operating position Any position
  • Installation category II conforming to IEC 60947-1
  • Mounting support Asymmetrical DIN rail
  • Combination rail
  • Symmetrical DIN rail
  • Product weight 0.048 kg
  • Environment
  • Immunity to microbreaks 1 ms
  • Dielectric strength 1000 V for 1 minute between open contacts
  • 1500 V between coil circuit and contact circuits
  • 2500 V for 1 minute between wired interface and earth
  • Standards IEC 60947-5-1
  • Product certifications BV
  • CSA
  • DNV
  • LROS (Lloyds register of shipping)
  • UL
  • IP degree of protection IP20 conforming to IEC 60529
  • Protective treatment TC
  • Fire resistance 960 °C conforming to IEC 60695-2-1
  • Shock resistance 30 gn for 11 ms conforming to IEC 60068-2-27
  • Vibration resistance 3 gn (f = 10...150 Hz) conforming to IEC 60068-2-6
  • Electromagnetic compatibility 1.2/50 µs shock waves immunity test, 0.5 kV for U < 50 V conforming to IEC 60947-1
  • 1.2/50 µs shock waves immunity test, 1.5 kV for U < 150 V conforming to IEC 60947-1
  • 1.2/50 µs shock waves immunity test, 2.5 kV for U < 300 V conforming to IEC 60947-1
  • Electromagnetic field immunity test level 3, 10 V/m between 27...1000 MHz conforming to IEC
  • 61000-4-3
  • Electrostatic discharge immunity test level 3, 8 kV conforming to IEC 61000-4-2
  • Fast transients immunity test level 3, on input/output 1 kV conforming to IEC 61000-4-4
  • Fast transients immunity test level 3, on power supply 2 kV conforming to IEC 61000-4-4
  • Ambient air temperature for operation -5...40 °C unrestricted operation
  • -5...55 °C from 0.85...1.1 Us
  • -25...55 °C at Us
  • -25...70 °C at Us with 8 mm space between ABR2S1...
  • Ambient air temperature for storage -40...80 °C
  • Operating altitude <= 3000 m
  • Pollution degree 2 conforming to IEC 60947-1
  • Contractual warranty
  • Warranty period 18 months
  • 2
  • Product data sheet
  • ABR2SB312B
  • Dimensions Drawings
  • Slim Electromechanical Interface Module
  • Dimensions
  • 3
  • Product data sheet
  • ABR2SB312B
  • Connections and Schema
  • Slim Electromechanical Interface Module
  • Example of Application with PLC
  • Interfacing PLC discrete outputs
  • (1) Essential on inductive loads (can be replaced with peak limiter)
  • (2) PLC positive logic transistor (or relay) outputs
  • (3) PLC analog inputs
  • (4) Channel X
  • (5) Analog sensors
  • 4
  • Product data sheet
  • ABR2SB312B
  • Connections and Schema
  • Slim Electromechanical Interface Module
  • Circuit Diagram
  • 1 C/O
  • 5

Produits qui pourraient aussi répondre à vos besoins

Produits récemment consultés

Aucun produit récemment consulté à afficher
références de produits

100 000 de références

Trouvez tout ce dont vous avez besoin dans notre catalogue

livraison rapide

Livraison adaptée à vos besoins

Nos solutions de livraison fiables et rapides facilitent votre quotidien

expert senia electrique

Des conseils d’expert

Recevez une assistance technique de spécialistes pour soutenir vos projets

Panier
Retour en haut