GC2504F6
Documentation technique PDF
CONTAC TO R GC 4 NC 25 A 110 V AC
Spécificités essentielles
Produits associés
-
Quick ViewAjouter au panier -
Quick ViewAjouter au panier -
Quick ViewAjouter au panier
Options et accessoires compatibles
Référence : GC2504F6
Marque : Schneider
Disponibilité : En Stock
- GC2504F6
- Characteristics
- TeSys GC - modular contactor - 25 A - 4 NC - coil
- 110 V AC
- Main
- Range TeSys
- Product name TeSys GC
- Product or component type Modular contactor
- Device short name GC25
- Contactor application Heating
- Motor control
- Lighting
- Complementary
- Utilisation category AC-7B
- AC-7A
- Poles description 4P
- Pole contact composition 4 NC
- [Ue] rated operational voltage <= 250 V AC
- [Ie] rated operational current 25 A AC-7A
- 8.5 A AC-7B
- Operating position 30°/Vertical
- Control circuit type AC 60 Hz
- Control circuit voltage 110 V AC 60 Hz
- [Uimp] rated impulse withstand voltage 4 kV
- [Ith] conventional free air thermal 25 A at <= 50 °C for power circuit
- current
- Irms rated making capacity 68 A at 400 V AC for power circuit conforming to IEC 61095
- Rated breaking capacity 68 A at 400 V for power circuit conforming to IEC 61095
- [Icw] rated short-time withstand current 200 A <= 40 °C 10 s power circuit
- 62 A <= 40 °C 30 s power circuit
- Associated fuse rating 25 A gL at <= 440 V for power circuit
- Average impedance 2.5 mOhm at 50 Hz - Ith 25 A for power circuit
- [Ui] rated insulation voltage 500 V conforming to IEC 61095
- Jun 12, 2017
- 1
- Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
- 500 V conforming to VDE 0110
- Electrical durability AC-7A : 100000 cycles
- AC-7B : 100000 cycles
- Control type Remote control
- Mounting mode Clip-on
- Mounting support DIN rail
- Standards IEC 61095
- IEC 60947-5
- Connections - terminals Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
- end
- Control circuit : screw clamp terminals 2 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
- end
- Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - with cable end
- Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
- Control circuit : screw clamp terminals 1 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
- Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
- Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - without cable end
- Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: flexible - without cable end
- Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - with cable end
- Power circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
- Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: solid - without cable end
- Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: solid - without cable end
- Tightening torque Control circuit : 0.8 N.m - on screw clamp terminals
- Power circuit : 0.8 N.m - on screw clamp terminals
- Operating time 10...25 ms opening
- 10...30 ms closing
- Mechanical durability 1000000 cycles
- Operating rate 300 cyc/h at <= 50 °C
- Control circuit voltage limits 0.2...0.75 Uc at <= 50 °C drop-out 50 Hz
- 0.85...1.1 Uc at <= 50 °C operational 50 Hz
- Hold-in power consumption in VA 4.6 VA at 20 °C 50 Hz
- Heat dissipation 1.6 W at 50/60 Hz
- Environment
- IP degree of protection IP20 conforming to VDE 0106
- IP40 in enclosure conforming to VDE 0106
- Protective treatment TC
- Ambient air temperature for operation -5...50 °C
- Ambient air temperature for storage -40...70 °C
- Operating altitude <= 3000 m
- Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
- Shocks contactor open 10 Gn for 11 ms
- Shocks contactor closed 15 Gn for 11 ms
- Vibrations contactor closed 3 Gn, 5...300 Hz
- Total number of 18 mm modules 2
- Height 85 mm
- Width 36 mm
- Depth 62.5 mm
- Product weight 0.23 kg
- Quantity per set Set of 6
- Colour White
- Contractual warranty
- Warranty period 18 months
- 2
Produits Similaires
Produits récemment consultés
![Logo](https://seniadz.net/wp-content/uploads/2019/10/logo_2018.jpg"){kind=logo}
