Nos marques

Tous les produits Schneider

Produits récemment consultés

KDP20ED424270

2.257,43DZD

CA3KN40ND

4.387,20DZD

EZEAXAL

4.838,71DZD

GC2520M5

UGS : 45314fdcbbab Catégorie :
schneider
CONTAC TO R GC 2 NO 25 A 220 TO 240 V AC

6.968,17DZD

UGS : 45314fdcbbab

Spécificités essentielles

Produits associés

Options et accessoires compatibles

Référence :

GC2520M5 Marque : Schneider Disponibilité : En Stock



  • GC2520M5
  • Characteristics
  • TeSys GC - modular contactor - 25 A - 2 NO - coil
  • 220...240 V AC
  • Main
  • Range TeSys
  • Product name TeSys GC
  • Product or component type Modular contactor
  • Device short name GC25
  • Contactor application Heating
  • Motor control
  • Lighting
  • Complementary
  • Utilisation category AC-7A
  • AC-7B
  • Poles description 2P
  • Pole contact composition 2 NO
  • [Ue] rated operational voltage <= 250 V AC
  • [Ie] rated operational current 25 A AC-7A
  • 8.5 A AC-7B
  • Operating position 30°/Vertical
  • Control circuit type AC 50 Hz
  • Control circuit voltage 220...240 V AC 50 Hz
  • [Uimp] rated impulse withstand voltage 4 kV
  • [Ith] conventional free air thermal 25 A at <= 50 °C for power circuit
  • current
  • Irms rated making capacity 68 A at 400 V AC for power circuit conforming to IEC 61095
  • Rated breaking capacity 68 A at 400 V for power circuit conforming to IEC 61095
  • [Icw] rated short-time withstand current 200 A <= 40 °C 10 s power circuit
  • 62 A <= 40 °C 30 s power circuit
  • Associated fuse rating 25 A gL at <= 440 V for power circuit
  • Average impedance 2.5 mOhm at 50 Hz - Ith 25 A for power circuit
  • [Ui] rated insulation voltage 500 V conforming to IEC 61095
  • Jun 12, 2017
  • 1
  • Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
  • 500 V conforming to VDE 0110
  • Electrical durability AC-7A : 100000 cycles
  • AC-7B : 100000 cycles
  • Control type Remote control
  • Mounting mode Clip-on
  • Mounting support DIN rail
  • Standards IEC 60947-5
  • IEC 61095
  • Connections - terminals Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
  • end
  • Control circuit : screw clamp terminals 2 cable(s) 2.5 mm² - cable stiffness: flexible - without cable
  • end
  • Control circuit : screw clamp terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - with cable end
  • Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
  • Control circuit : screw clamp terminals 1 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
  • Control circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: solid - without cable end
  • Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - without cable end
  • Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: flexible - without cable end
  • Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: flexible - with cable end
  • Power circuit : screw clamp terminals 2 cable(s) 1.5 mm² - cable stiffness: flexible - with cable end
  • Power circuit : screw clamp terminals 1 cable(s) 6 mm² - cable stiffness: solid - without cable end
  • Power circuit : screw clamp terminals 2 cable(s) 4 mm² - cable stiffness: solid - without cable end
  • Tightening torque Control circuit : 0.8 N.m - on screw clamp terminals
  • Power circuit : 0.8 N.m - on screw clamp terminals
  • Operating time 10...25 ms opening
  • 10...30 ms closing
  • Mechanical durability 1000000 cycles
  • Operating rate 300 cyc/h at <= 50 °C
  • Control circuit voltage limits 0.2...0.75 Uc at <= 50 °C drop-out 50 Hz
  • 0.85...1.1 Uc at <= 50 °C operational 50 Hz
  • Hold-in power consumption in VA 3.8 VA at 20 °C 50 Hz
  • Heat dissipation 1.3 W at 50/60 Hz
  • Environment
  • IP degree of protection IP20 conforming to VDE 0106
  • IP40 in enclosure conforming to VDE 0106
  • Protective treatment TC
  • Ambient air temperature for operation -5...50 °C
  • Ambient air temperature for storage -40...70 °C
  • Operating altitude <= 3000 m
  • Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
  • Shocks contactor open 10 Gn for 11 ms
  • Shocks contactor closed 15 Gn for 11 ms
  • Vibrations contactor closed 3 Gn, 5...300 Hz
  • Total number of 18 mm modules 1
  • Height 81 mm
  • Width 17.5 mm
  • Depth 62.5 mm
  • Product weight 0.11 kg
  • Quantity per set Set of 12
  • Colour White
  • Contractual warranty
  • Warranty period 18 months
  • 2

Produits Similaires

100 000 de références

Trouvez tout ce dont vous avez besoin dans notre catalogue

Livraison adaptée à vos besoins

Nos solutions de livraison fiables et rapides facilitent votre quotidien

Des conseils d’expert

Recevez une assistance technique de spécialistes pour soutenir vos projets

13
    13
    Votre panier
    ZC2JE63
    ZC2JE63
    1 X 10.404,39DZD = 10.404,39DZD
    KBB25ED22305TW
    KBB25ED22305TW
    1 X 25.971,55DZD = 25.971,55DZD
    NSYBBF1U80
    NSYBBF1U80
    1 X 11.315,93DZD = 11.315,93DZD
    AB1GM
    AB1GM
    1 X 54,04DZD = 54,04DZD
    GV2AF4
    GV2AF4
    1 X 592,73DZD = 592,73DZD
    LC1DT80ALE7
    LC1DT80ALE7
    1 X 25.170,82DZD = 25.170,82DZD
    PKF32G744
    PKF32G744
    1 X 5.054,51DZD = 5.054,51DZD
    CA2KN22U72
    CA2KN22U72
    1 X 4.743,75DZD = 4.743,75DZD
    KBA25ED4302W
    KBA25ED4302W
    1 X 7.474,53DZD = 7.474,53DZD
    NSYEC751
    NSYEC751
    1 X 8.655,71DZD = 8.655,71DZD
    DF2CN06
    DF2CN06
    1 X 373,02DZD = 373,02DZD
    33467
    33467
    1 X 293.324,69DZD = 293.324,69DZD
    schneider
    CA2KN22B72
    1 X 4.085,86DZD = 4.085,86DZD